MRE-W32SP062FBC-MRE-WG-NSD Vietnam-STC Vietnam

CYLNUC is NSD smart linear position sensing cylinder that indicates the amount of linear travel and rod extension throughout the range of sensing stroke.

• 
• 
• 

Model coding

CSA-[a]×[b]-[c][d]-C[e]-[f]

Standard model code:CSA-20×250-FA7-C2.0-A1

	Item	Code	Description
a	Bore size	20	Φ20		Units : mm
		40	Φ40
b	Stroke length	30 ～ 500	Φ20	標準 : 30, 50, 60, 80, 100, 110, 150, 200, 230, 250, 300, 350, 400, 450, 500	Units : mm
		30 ～ 700	Φ40	標準 : 30, 50, 80, 100, 120, 150, 200, 250, 300, 350, 400, 500, 600, 700
c	Mounting style	[FA]Flange on rod end side
		[LS]Foot on rod end side /parallel to axis
		[TB]Trunnion on head end side
		[FB]Flange on head end side
		[LB]Foot both ends /parallel to axis
d	Max. operating pressure	7	0.7 MPa(7kgf/cm2)
		0	Piston with hole
e	nterconnecting sensor cable length	2.0	2 m
f	Option	A1	Lock nut (accessory)
		A2	Clevis / single
		A3	Clevis / double (supplied with a Pivot pin A4)
		A4	Pivot pin (for Clevis)
		C4	Bellows

System Configuration

Specification

Cylinder

Item		Specification
Bore size		Φ20	Φ40
Rod diameter(mm)		Φ10	Φ14
Stroke(mm)	Without bellows	30 ～ 500	30 ～ 700
	With bellows
Operating pressure range(MPa (kgf/cm2))		0.1 ～ 0.69(1 ～ 7)
Proof pressure(MPa (kgf/cm2))		1.03(10.5)
Operating fluid		Compressed air
Cylinder speed range(mm/s)		50 ～ 500
Ambient operating temperature(℃)		5 ～ 60

Applicable sensor

Item	Specification
Absolute detection range	12.8
Resolution(mm)	0.00156
Linearity error(mm)	0.25 + L/2000 Max. L : Stroke
Protection rating	IP67(Conforms to JAM 1030 standard)
Vibration resistance	2.0×102 m/s2 {20G} 200Hz up / down 4h, forward / back 2h, conforms to JIS D1601 standard
Shock resistance	4.9×103 m/s2 {500G} 0.5ms up / down / forward / back×3 times each, conforms to JIS C5026 standard

Dimensions

• CSA-20×□-FA
  CSA-40×□-FA
• CSA-20×□-FB
  CSA-40×□-FB
• CSA-20×□-LS
  CSA-40×□-LS
• CSA-20×□-LB
  CSA-40×□-LB
• CSA-20×□-TB
  CSA-40×□-TB

• 
• 
• 

Model coding

SBA- [a]×[b]-[c][d]-[e][f][g]J[g][h] *1

Standard model code:SBA-50×250-FA9.9-BT0J0A1

	Item	Code	Description
a	Bore size(mm)	40	Φ40
		50	Φ50
		63	Φ63
		80	Φ80
		100	Φ100
b	Stroke length(mm)	50 ～ 1000	Φ40	10 mm units is possible.
		50 ～ 1000	Φ50
		50 ～ 1400	Φ63
		50 ～ 1600	Φ80	With bellows : 50～1400
		50 ～ 1800	Φ100	With bellows : 50～1500
c	Mounting style	[00]Basic type
		[LB] Foot both ends / parallel to axis
		[FA]Flange on rod end side
		[FB]Flange on head end side
		[CA]Clevis / single
		[CB]Clevis / double
		[TA]Trunnion on rod end side
		[TC]Intermediate fixed trunnion
d	Max. operating pressure	9.9	0.97 MPa(9.9kgf/cm2)
		0	Piston with hole
e	Cushion	B	Both ends of cylinder
		N	Non
f	ポート形式	T	Rc
		N	NPT(Order)
g	f (port), J (sensor connector) mounting location as viewed from rod end		Please contact your NSD representative when attached cable type is required.
h	Option	A1	Lock nut (accessory)
		A2	Clevis / single
		A3	Clevis / double (supplied with a Pivot pin A4)
		A4	Pivot pin (for Clevis)
		B1	Bracket / single (supplied with a pivot pin B3)
		B2	Bracket / double (supplied with a pivot pin B3)
		B3	Pivot pin (for bracket)
		C2	Bellows (Neoprene)

*1 : "J" shows that the sensor terminal shape is a connector.

System Configuration

Specification

Cylinder

Item		Specification
Bore size		Φ40	Φ50	Φ63	Φ80	Φ100
Rod diameter(mm)		Φ18	Φ20	Φ22.4	Φ28	Φ36
Stroke(mm)	Without bellows	50 ～ 1000		50 ～ 1400		50 ～ 1600	50 ～ 1800
	With bellows					50 ～ 1400	50 ～ 1500
Operating pressure range(MPa (kgf/cm2))		0.2 ～ 0.97(2 ～ 9.9)
Proof pressure(MPa (kgf/cm2))		1.5(15)
Operating fluid		Compressed air
Cylinder speed range(mm/s)		50 ～ 500
Ambient operating temperature(℃)		5 ～ 60

Applicable sensor

Item	Specification
Absolute detection range	12.8
Resolution(mm)	0.00156
Linearity error(mm)	0.25 + L/1000 Max. L : Stroke
Protection rating	IP40 (Conforms to JAM 1030 standard)
Vibration resistance	2.0×102 m/s2 {20G} 200Hz up / down 4h, forward / back 2h, conforms to JIS D1601 standard
Shock resistance	4.9×103 m/s2 {500G} 0.5ms up / down / forward / back×3 times each, conforms to JIS C5026 standard