| Moisture Sensor |
Range: -110°C to +20°C dewpoint ( -166°F to +68°F dewpoint )
Accuracy: ±2°C temperature corrected
Repeatability: 0.8°C
Response time: 95% of step change in 3 min.
Sample flow: >1 LPM
|
| Temperature Sensor |
Range: -40°C to +70°C
Accuracy: ±2°C
|
| Pressure Sensor |
2 to 150 PSIA ±1%, 316L stainless steel wetted parts; higher pressures can be ordered optionally
|
| Ergonomics |
Comfortable to hold in hand, contoured body design, lightweight 1.75 Lbs
Hook and magnet for easy temporary field securing / mounting
Easy to read graphic LCD display with user controlled backlight brightness (LCD is readable without the backlight)
Snap dome tactile membrane switches with dynamically assigned legends
Audible feedback upon button press as well as for warnings and alarms
Auto scaling graph / histogram on moisture measurement display for stability verification
Easy to use with verbose built-in context sensitive Help screens
Battery Saver, with user selectable Auto-power-down times, can also be disabled
Built-in pressure measurement and pressure corrected moisture readings, simultaneously displayed with the uncorrected reading for
greater ease of understanding
Verbose Status bar with indications, warnings and audible errors
User selectable locking with or without a password.
Built-in battery backed clock calendar
|
| Electrical |
External AC Universal Power adapter (100-240VAC 50-60Hz) with USB connector
Rechargeable Li-Ion battery, recharges through the USB connector from the PC or from the supplied universal power adapter
Sampling system and sensor are isolated from electrical interface and supply grounds
Measurement resolution of moisture sensor: 1pF resulting in less than 0.01°C
External power and I/O: USB mini B female connector – IP67 / IP68 with Sealing Cap
|
| Mechanical |
1/8″ Swagelok® Inlet and Outlet fitting adapters for the SAE/MS 5/16-24 ports.
Inlet adapter has a built-in flow control orifice, eliminating pressure regulators while maintaining sufficient but not excessive flows.
All 316 Stainless Steel and PTFE wetted parts, small surface area stainless steel sampling chamber for fast response time.
Integral Sensor retraction into desiccant storage chamber for fast response-time when measuring low moisture
Enclosure
Impact resistant (>7 Nm to EN 50014) Polyamide 12,
IP65/EN 60529 ATEX hazardous area use (Ex II 2 G) approved (PTB 02 ATEX 1076U),
Flammability: UL 94 HB
Abrasion resistant Polycarbonate display lens
Dimensions- L: 7.36″ (187mm) W: 4.17″ (106mm) H: 1.97″ (50mm)
Weight Total: 1.75 Lbs (0.8 Kg)
Pressure: 150 PSIA (10.3 Bar) — Available with High Pressure Option 500 PSIA (34.5 Bar)
|
| Temperature Range |
PPMa Analyzer: -20°C to +60°C
Electronics: -40°C to +85°C
Moisture Sensor: -20°C to +60°C
Pressure Sensor: -20°C to +85°C
LCD operating: -20°C to +70°C storage: -30°C to +80°C
Enclosure: -40°C to +60°C
|
| Miscellaneous Features |
NIST traceable calibrations
Units of measure: °C & °F dewpoint, ppmV, ppmW, µB H2O vapor pressure, grams of H2O / m3,
Lbs H2O /106 standard cubic feet in Natural Gas. (All units auto-scaled)
Digital & Analog I/O: USB, 4/20mA with HART®
Data logging – single point, multipoint, time stamping, each sample records: dewpoint, temperature and pressure, ( memory > 4,000 samples)
Virtual Analyzer PC software for training and evaluation,
allows the user to experience the exact interface on their own PC with voice explanations
|
Chúng tôi chuyên cung cấp các sản phẩm về: Cảm biến, đầu dò, encoder, relays, PLC, HMI, inverter, thiết bị đo nhiệt độ, áp suất, lưu lương, đo mức, motor, pump…
Không có nhận xét nào:
Đăng nhận xét